Dynamo 220W Kit
Aspire now brings you yet another kit with awesome flexibility and lots of power. Introducing the new Aspire 220 watt Dynamo kit. It allows for use with three different battery types, 18650, 20700 or 21700. The Dynamo can also be used in various modes, allowing you to easily select between Wattage, Voltage, Bypass, CPS (C1/C2/C3), TC(Ni/Ti/SS316L) and TCR(M1/M2/M3). It comes in five super colors Dark Grey, Red with Black, Rainbow, Purple, and Camo with Black, and all have the new Nepho tank in complimentary colors.
Aspire Dynamo Kit Dimensions and Specifications
Even though the Dynamo is a dual battery mod, it is still quite ergonomic and comfortable to hold thanks to its rounded sides and corners. With an output wattage of up to 220 watts regardless of which type of battery is used, 18650, 20700 or 21700.
Aspire Dynamo Kit Components
Aspire Nepho Coil
The new press-fit Nepho coils supplied with the Nepho kit come in two types with two resistances. The first, a 0.5ohm Kanthal wire coil and Aspires all-new mesh coil rated at 0.15 ohms, again made with Kanthal wire. Both have excellent wicking properties due to the large wicking ports.
Aspire Nepho Coil Installation
Coil installation couldn’t be easier; simply unscrew the base hardware, pull out the used coil, replace it with a new one (it just drops in) and screw the base hardware back to the tank. The new Nepho coils are now press-fit so are much less messy to handle when replacing.
Aspire Nepho Tank Filling
On the Nepho tank, Aspire has introduced a simpler system for filling, incorporating a safer child lock mechanism. Pull up the top cap, place your thumb on the top cap right above the triangle symbol and push the top cap away until the filling hole is revealed. Then add your preferred e-liquid into the tank through the filling hole, push the top cap back into place and push the top cap down to lock. Note: As usual when using a new atomizer, let the tank stand for 5 minutes after filling so the cotton can be saturated with e-liquid before use. Do not let the tank become completely empty. Refill the tank to avoid dry burning or damage to the atomizer.
Aspire Nepho Tank Airflow
The triple slot airflow is easy to adjust to your own vaping style and preference. The Nepho tank ensures great flavor at all settings with a wide bore Delrin drip tip ensuring comfort. The large wicking ports in both the standard coil and the new mesh coil make sure the tank ‘breathes’ easily with little chance of dry hits and saturated delicious flavor, especially with the mesh coil.
Aspire Dynamo Kit Kit Battery Installation
Turn off the MOD and remove the tank. Pull the lock catch to allow the battery door to open. When replacing the batteries, please pay attention to the correct positive and negative connections. Then insert the battery of your choice, 18650 (use the supplied silicon adapter), 20700 or 21700. Insert the batteries as seen in the diagram and close the battery door, ensuring the door catch is securely fastened.
Aspire Dynamo Mod Screen, Settings, and Modes
The very clear, large circular screen and interface allows access to adjust the values of different output modes, Data, System, Time and About. Simple to navigate and easy to see.
Aspire Dynamo Mod Watch UI
Press the fire button to enter. When you are in “Time Set” press the fire button to choose the value you want to adjust, press up or down button to change the values and turn on or off the watch. Enter Watch UI to choose your preferred watch UI displayed on your mod; we’ve created 11 different types of Watch UI to expand your choices.
Aspire Dynamo Kit Safety Features
The Dynamo kit comes with all the safety features that Aspire is famous for.
Aspire Dynamo Kit Charging
Charging the mod via Micro-USB charging port, the charging current can reach up to 2A. When connecting the mod to the charger, the screen will display two growing battery icons with the two circular rings around the screen edge showing a rotary movement when charging. The screen also displays the battery percentage, charge time and charge current. Once the battery level reaches 4.2V or when it’s fully charged, the mod will stop charging the screen will shut off. The mod will not charge when the batteries are incorrectly installed or when there’s only one battery installed. The batteries cannot be replaced while charging; please unplug the charging cable before changing the batteries.
Aspire Spryte Kit Contents
1* Dynamo mod / 1* Nepho Tank / 1* Glass tube / 8* O-rings / 2* Coils (1*0.5Ω & 1*0.15Ω Mesh Coil) / 1* USB Cable / 1* Warning card / 1* User manual / 1* Warranty card / 1* Dual 18650 battery adapter