Aspire Tigon 3.5ml Tank
Aspire Tigon 3.5ml Tank
Introducing the Tigon kit, an easy to use ‘child safe’ compact tank from ASPIRE. It comes in four stylish color finishes, Stainless Steel, Blue, the ever-popular Rainbow, and Black. It can be used as an MTL (mouth to lung) or a restricted DTL (direct to lung) vape. Whichever size you choose, you can be sure of a great performing tank with great flavor an vapor production It is the first Aspire tank to use an ingenious design that will seal the wicking holes in the tank when the coil is removed.
Aspire Tigon 3.5ml Tank Dimensions
Aspire Tigon Tank Components
Aspire Tigon Tank Standard and TPD Versions
The easy maintenance Aspire Tigon tank is, of course, removable and as previously stated comes in a standard 3.5ml version and a 2ml TPD version, both have interchangeable 510 drip tips for either MTL or DTL style vaping.
Aspire Tigon Tank Drip Tips
The Tigon tank comes supplied with a choice of MTL, longer style, drip tip and a slightly wider bore ‘stubby’ style drip tip more suited to restricted DTL hits.
Aspire Tigon Coils
Aspire has included more flexibility in the Tigon kit by including three types of push fit coils. A 0.4ohm DTL style coil designed to run from 23-28 watts, 0.7 ohm DTL style mesh coil designed to run at 10-12 watts more suited to MTL style vaping. The 0.4 ohm coil and 1.2 ohm coil are made from high grade nichrome wire, and 0.7 ohm mesh coil is made from kanthal wire, with great wicking properties for a flavorful vape.
The push fit coils help reduce mess when changing and are much easier to remove and replace. The 1.2ohm coil would be suitable for nic salt type e-liquid but can equally be used with normal e-liquid.
Aspire Tigon Filling
The filling couldn’t be simpler in a child-proof/leak proof tank of this type. First, pull up on the top cap, then with your thumb or finger on the marker, slide open the top cap to reveal the silicon leak-proof seal of the fill port. The silicon fill port on the TPD version tank has a self-sealing valve into which you can insert your chosen filling bottle nozzle to fill the tank. Closing the tank is the opposite, slide the top cap back into place covering the silicon seal and push down.
Remember, when using a new coil, to let the cotton of the coil saturate in the e-liquid for 5 minutes or so before you start to vape. This will ensure that you don’t get dry hits or damage the coil.
Aspire Tigon Coil Installation
On the Aspire Tigon tank, coil replacement is just a case of unscrewing the base hardware, pulling out the old coil and replacing with a new one. Then screwing the base hardware back on again. Note that the Tigon tank can still hold e-liquid when changing the coil, this is because the wicking holes in the tank are covered by a spring loaded sleeve that will slide shut sealing the holes when the coil is removed. Remember, before using a coil for the first time to let it stand for 5 minutes after filling with e-liquid to saturate the coil and avoid dry hit and damage to the coil.
Aspire Tigon Tank TPD Version Tube Removal and Installation
When removing and/or replacing the glass tube on the childproof TPD version of the tank, you need to follow these steps. First, unscrew and remove the base hardware and pull out the coil. Then invert the tank and using the special key provided, unlock the top hardware by placing it in the slot of the screw holding the top hardware (see diagram). Next, remove the glass tube. Replace the glass tube and follow the steps in reverse, (it is easier to place the screw onto the key first to locate it into the top hardware), secure the screw, insert the coil and replace the base hardware. Remember, before using a coil for the first time to let it stand for 5 minutes after filling with e-liquid to saturate the coil and avoid dry hit and damage to the coil.
Ingenious Self-Cleaning Coil Housing
The first Aspire product to use an ingenious design that will seal the wicking holes in the tank when the coil is removed.
Aspire Tigon 3.5ml Tank Airflow
The Tigon tank has Aspire’s new dual function airflow settings. Turning it initially will reveal 5 smaller holes than can be adjusted from 5 open to 4 then 3,2,1. This is for the MTL type vaping with 1 small hole being the tightest draw. Rotating the airflow adjustment further will reveal a ‘slot’ style airflow adjustment, again this can be adjusted from wide open to almost closed for a restrictive DTL type hit.
1* Tigon tank / 1* Glass tube / 2* Ni80 Coils (1*1.2Ω & 1*0.4Ω preinstalled) / 10* O-rings / 1* Extra drip tip / 1* USB cable 1* User manual / 1* Warranty card
TPD Version: 1* Tigon tank / 1* Glass tube / 2* Ni80 Coils (1*1.2Ω & 1*0.4Ω preinstalled) / 1* Screw adjustment tool / 10* O-rings 1* Extra drip tip / 1* USB cable / 1* User manual / 1* Warranty card