WARNING: This product contains nicotine.
Nicotine is an addictive chemical.

Aspire is excited to present to you the all new Triton 2 tank system. The tank features the same amazing adjustable airflow controls and convenient top-fill design from the original Triton but with an all new option of Clapton replacement coil heads! The Triton 2 has an adjustable airflow control that allows you to dial in on your favorite airflow setting. Looking to enhance and personalize your vape experience even more? No worries! The Triton 2 has a variety of coils available so that you will surely be able to enjoy any style of vaping you like. If you prefer a mouth-tolung or straight-to-lung style, the Triton 2’s airflow control and coil selection has you covered.

Triton 2 Dimensions

The tank consists of a stainless steel body and Pyrex glass tube with a 3.0ML capacity.

Tank Dimensions:

  • 67mm height, 22.5mm width

Triton Top Dimensions

The stainless steel tank has a standard 510 drip tip system.

Dimensions:

  • 14mm height, 11.5mm width

Triton Top Assembly

The two-notched fins acts as a heat sink to dissipate the heat from the drip tip. It also acts as a grip for unscrewing the tank’s drip tip system. Simply twist the top to the left to disassemble, and then the right to securely screw the top back on.

Triton 2 Coils

Aspire uses Japanese organic cotton for the Triton’s wicking material, ensuring a full-bodied flavor from all of your favorite ejuices. Here are some coil options to make your vaping experience perfect for you:

Included with the Triton 2 is the 1.8 OHM coil (encoded with a blue gasket) and the 0.5 OHM coil (encoded with a yellow gasket).

0.5ohm and 0.5 Coil

The 0.5 OHM Clapton coil has a kanthal base wire and anthill wrap, which provides more surface area compared to the standard coil design. This results in greater vapor production, which gives a noticeable increase in flavor.

  • 0.5 OHM
  • Rated at 40-45 watts
  • 0.4mm diameter
  • 6.2mm spacing
  • Yellow gasket

180ohm and 18 Coil

Using traditional Kanthal, this coil is suitable for mouthto-lung vaping.

  • 1.8 OHM
  • Rated at 10-13 watts
  • 0.18mm diameter
  • 1.3mm spacing
  • Blue gasket

0.30ohm and 03 Coil

  • 0.3 OHM
  • Rated at 45-55 watts
  • 0.9mm diameter
  • 0.5mm spacing
  • Black gasket

0.40ohm and 04 Coil

  • 0.4 OHM
  • Rated at 25-30 watts
  • 0.5mm diameter
  • 1mm spacing
  • Black gasket

0.150ohm and 015 Coil

If you have been waiting to use temperature control with your Triton, the wait is over. Aspire introduces the Ni200 0.15OHM temperature control coil. Because Ni (nickel) is a low resistance metal and requires low power to heat up, you must use this coil under a temperature control mode.

  • 0.15 OHM
  • NI200
  • 0.18mm diameter
  • 1.3mm spacing
  • Red gasket

Triton 2 Coil Assembly

Remove the bottom hardware from the tank system and simply screw in your replacement atomizer.

Filling Instructions

Triton 2 Contents

  • Aspire Triton 2 Tank
  • 0.5OHM Clapton Coil w/ Yellow Gasket, Rated at 40-45 watts (installed)
  • 1.8OHM Traditional

2 Comments

  1. Eric J Schneider

    Hello,
    I need to replace just the bottom part (with threads & airholes) of my Triton 2 clearomizer. After only a month of usage, it went bad….all of a sudden I took a draw and it was like a toxic burnt smoke taste. I immediately replaced my coil with a Triton coil that came with tank but it didn’t help….expecting the clearomizer to adjust to the new coil with fresh draws, I tried a couple more times, only to then get the message : “No Clearomizer”, reading on my battery.
    Please let me know if I am able to replace just the bottom portion.
    Thank you for your time.

    My email address is:
    [email protected]

    • Aspire Vape Co. Team

      Hi! Thank you for your inquiry. In your case I would recommend referring back to your warranty card, which supplies information to how you can contact the manufacturer to get a replacement or guidance to fix the problem.