Aspire Typhone Revvo Kit
Aspire Typhon Revvo Kit
Introducing a new addition to our kit range, the Aspire Typhon 100 Revvo Kit , A brand new kit, combining the imaginative, innovative Revvo tank, and the Typhon 100 mod. The Revvo tank with an all new coil design, the ARC, Aspire Radar Coil, where the coil itself sits horizontally in the tank similar to a ‘stove-top’ for great flavor and great vapor production. It’s a 24mm diameter tank with a 3.6ml standard and a 2ml TPD version. The tank has a fully adjustable top airflow by way of 3 airflow slots, and super easy top fill through a spring loaded filling tube. The mod itself is both compact and ergonomic, with a curvy design and is powered by a 5000mAh internal battery, with a maximum output wattage of 100W. The Typhon 100 also supports VW/VV/Bypass/CPS/TCR.
The kit comes with three splashed colors: Blue, Green and Red.
Aspire Typhon Revvo Kit Dimensions and Specifications
The tank comes in a TPD compliant 2ml version and a standard 3.6ml version.
Aspire Typhone Revvo Kit Components view
Easy maintenance Revvo tank
Aspire Revvo Tank Airflow
The tank has adjustable top airflow with three large air inlets to enable full enjoyment of your favorite e-liquids.
Aspire Revvo Tank Filling
Filling your new Revvo through the centre of the tank, in which sits a spring loaded filling tube. The spring of the tube is soft enough to allow even slight pressure from almost any type of bottle/giass dropper to open it, but strong enough to create a leak proof seal when released after filling.
Aspire Typhon Mod Firing Modes
Turning the mod on and off is the usual 5 clicks of the fire button and switching between or selecting firing modes is an easy task with the various combinations of button presses. Whatever your vaping style or preference, the Typhon 100 can cater, whether it be variable wattage, variable voltage, bypass (similar to using a mechanical mod) temperature control or setting up a power curve. The Typhon 100 can do it all!
Aspire Typhon Mod Charging
Charging couldn’t be easier, just attach the supplied micro usb cable to the charging port and attach to a power supply. When you connect your Typhon 100 mod to the charger the screen will display a flashing battery icon as well as battery voltage level, charge current and charge time. When the battery charge reaches 4.2V or is fully charged, the mod will stop charging and the screen will remain off. The maximum charging rate is 2 amps. Please note: Do not leave your mod unattended while charging and always use the usb cable provided to prevent damage to the mod.
Aspire Typhon Revvo Kit Contents
1* Typhon 100 mod /1* 3.6ml Revvo tank / 2* Coils (0.10-0.16ohm) /1* Glass tube /10* O-rings 1* USB cable /1* Warning card /1* User manual /1* Warranty card /1* Protective silicone cap